Did you ever think about online plagiarism ? Yes. online plagiarism is one of big problem we faced on online activities, actually when you are a blogger or other profession on writing. And till now, its has no problem solving about this situation. Because in some cases it difficult to know whether the origin post and the plagiarism post.
How to find the sites that have copied your content ? Well its not an ads, but hopefully can help you lets you easily identify sites that have copied your content without permission, as well as those who are quoting your site.
How to defend your site against the threats of online plagiarism?
You can go to these site and figure all you want such the sites that have copied your content and how it work here.
Thanks, hopefully usefull
[Read More...]
No For Online Plagiarism
Autostart on KDE
What is the first thing you do after you have logon to your X windows? some people always lunch some applications what they loved to do first before doing the main aim to open computer, what about you? such my self that want to write my blog posting always start the amarok player to play the music also the Konsole Terminal to do much more I like.
well, sometime it needs more time to do that. and the most I like is that we can use the autostart folder on KDE system to make all the application we want to start can run automatically. And yes, it also can save your time here.
you can use your autostart folder default on KDE, here the steps to do that:
1.
open on konqueror
go to /home/username/.kde/Autostart
such /home/majendra/.kde/Autostart
2.
Klik K-Menu, find the application you want to make it in autostart
drag an drop the application you want to autostart to Autostart Folder
3.
select the Link Here (Ctrl+Shift)
4.
repeat step 1-3 to make another auto start applications on KDe
[Read More...]
I can't use the sudo ... on my slackware
well as we known than the current user have specification to run all commands as the root was. but when we are the as dual user that use the current user as the commands daily and also can use the root user for the setting and the configuration system. we can use the sudo command to execute commands as another user also as a root.
but in my new slackware 12.1, I can't use the sudo command. and after I insert the password it gave results that the current user is not the sudoers file.
majendra@darkstar:~$ sudo vi /etc/fstab
majendra is not in the sudoers file. This incident will be reported.
As far as i know that we can use the sudo command on ubuntu for the default.So what sould i do with my slackware?
so to make the user be part of sudoers we can do some steps here:
1
login as root
2
open /etc/sudoers with editor
you can use vi editor
# vi /etc/sudoers
3
edit these line
find User Previlage
# User privilege specification
root ALL=(ALL) ALL
%users ALL=(ALL) ALL #add this line
It make all user in the “users” group
4
save and quit by type del and :wq
then try the sudo command.
thank you
X Configuration to X Windows
Well this posting is to complete my previous post about my monitor problem that go off it self after start the x windows.So lets starts to hacked the slackware 12.1.
X Window environment in Slackware is provided by Xorg. X is responsible for providing a graphical user interface. It is independent from the operating system, unlike Windows or the MacOS.
To configure X, you'll need to make an /etc/X11/xorg.conf file. This file contains lots of details about your video hardware, mouse, and monitor. It's a very complex configuration file, but fortunately there are several programs to help create one for you. We'll mention a few of them here.
xorgconfig
This is a simple menu driven frontend that's similar in feel to the Slackware installer. It simply tells the X server to take a look at the card, and then set up the best initial configuration file it can make based on the information it gathers. The generated /etc/X11/xorg.conf file should be a good starting point for most systems (and should work without modification).
This is a text-based X configuration program that's designed for the advanced system administrator. Here's a sample walkthrough using xorgconfig. First, start the program:
# xorgconfig
This will present a screenful of information about xorgconfig. To continue, press ENTER. xorgconfig will ask you to verify you have set your PATH correctly. It should be fine, so go ahead and hit ENTER.
Step-1. xorgconfig Mouse Configuration
Select your mouse from the menu presented. If you don't see your serial mouse listed, pick the Microsoft protocol -- it's the most common and will probably work. Next xorgconfig will ask you about using ChordMiddle and Emulate3Buttons. You'll see these options described in detail on the screen. Use them if the middle button on your mouse doesn't work under X, or if your mouse only has two buttons (Emulate3Buttons lets you simulate the middle button by pressing both buttons simultaneously). Then, enter the name of your mouse device. The default choice, /dev/mouse, should work since the link was configured during Slackware setup. If you're running GPM (the Linux mouse server) in repeater mode, you can set your mouse type to /dev/gpmdata to have X get information about the mouse through gpm. In some cases (with busmice especially) this can work better, but most users shouldn't do this.
xorgconfig will ask you about enabling special key bindings. If you need this say “y”. Most users can say “n” -- enter this if you're not sure.
Step-2. xorgconfig Horizontal Sync
In the next section you enter the sync range for your monitor. To start configuring your monitor, press ENTER. You will see a list of monitor types -- choose one of them. Be careful not to exceed the specifications of your monitor. Doing so could damage your hardware.
Step-3. xorgconfig Vertical Sync
Specify the vertical sync range for your monitor (you should find this in the manual for the monitor). xorgconfig will ask you to enter strings to identify the monitor type in the xorg.conf file. Enter anything you like on these 3 lines (including nothing at all).
Step-4. xorgconfig Video Card
Now you have the opportunity to look at the database of video card types. You'll want to do this, so say “y”, and select a card from the list shown. If you don't see your exact card, try selecting one that uses the same chipset and it will probably work fine.
Next, tell xorgconfig how much RAM you have on your video card. xorgconfig will want you to enter some more descriptive text about your video card. If you like, you can enter descriptions on these three lines.
You'll then be asked which display resolutions you want to use. Again, going with the provided defaults should be fine to start with. Later on, you can edit the /etc/X11/xorg.conf file and rearrange the modes so 1024x768 (or whatever mode you like) is the default.
At this point, the xorgconfig program will ask if you'd like to save the current configuration file. Answer yes, and the X configuration file is saved, completing the setup process. You can start X now with the startx command.
now you can try the x windows by type "startx" an hit the "enter" button. so have fun guess. Thank you
Other X configuration tips :
*1
The second way to configure X is to use xorgsetup, an automagical configuration program that comes with Slackware. To run xorgsetup, log in as root and type:
# xorgsetup
If you've already got an /etc/X11/xorg.conf file (because you've already configured X), you'll be asked if you want to backup the existing config file before continuing. The original file will be renamed to /etc/X11/xorg.conf.backup.
*2
To make desktop selection easy, Slackware also includes a program called xwmconfig that can be used to select a desktop or window manager. It is run like so:
% xwmconfig
[Read More...]
Others
| Links | Galery | Other | |
get the code Red Carpet : |
Quote of the Day
provided by The Free Library
|
Blog Archive
-
▼
2010
(11)
- ► March 2010 (2)
- ► January 2010 (8)
-
►
2009
(47)
- ► December 2009 (2)
- ► November 2009 (4)
- ► September 2009 (1)
- ► August 2009 (3)
- ► April 2009 (3)
- ► March 2009 (4)
- ► February 2009 (9)
- ► January 2009 (3)
-
►
2008
(33)
- ► December 2008 (2)
- ► November 2008 (6)
- ► October 2008 (7)
- ► September 2008 (7)
- ► August 2008 (11)